Lumeng Construction Machinery

NEWS CENTERL

Company News

Industry dynamics

Maintenance Method of Deep Water Well Drilling Rig

Release time:

2023-12-14

Check all exposed bolts, nuts, safety pins, etc. for security. Then it is necessary to add oil or grease according to the lubrication requirements. It is recommended that you check the oil level of the transmission, transfer case and hydraulic system oil tank. Also check whether there is oil leakage everywhere and deal with it as appropriate. Eliminate other failures that occur in the class. Of course, in the maintenance of the time, but also need to pay attention to the maintenance of the necessary items.
Clean the dirt and soil on the tooth surface of the chuck and slip. In addition, clean the oil, mud, etc. on the inner surface of the brake. But also mainly solve the problems that occur within a week. Thoroughly carry out projects required for class and weekly maintenance. What needs to be done when maintaining the water well drilling rig is to remove the chuck and clean the slips and slips.
If there is any damage, it should be replaced in time. Clean the filter in the oil tank and replace the deteriorated or dirty hydraulic oil. Check the integrity of the main components, if any damage, timely replacement, no injury operation. When maintaining the water well drilling rig, it should be noted that grease must be added every 8 hours of work, and the oil level of oil, hydraulic oil and gear oil should be checked, and the tightness of bolts should be checked. The whole car, especially the drill bit on the upper part of the drill pipe. The tightness of the bolt at the connection of the pull rod and the connection of the wire rope must be stopped for inspection when abnormal noise occurs during operation to ensure the safety of the man-machine.
The hydraulic oil should also be replaced regularly. Now everyone should know that hydraulic oil is as important to the hydraulic system as blood is to the human body. In addition to transferring energy, water well drilling rigs also have seven functions: lubrication, hydraulic pressure, cooling, protection (anti-rust), sealing, cleaning and vibration reduction. Whether the hydraulic system can work reliably depends on the performance of the hydraulic oil to a certain extent.
70% of drilling rig failures are caused by unclean hydraulic oil, so regular replacement of hydraulic oil can extend the service life of the drilling rig. Of course, we also need to choose the right drilling tools according to the geological conditions of construction, which can save fuel and protect the machine. When drilling is difficult, the drilling method can be changed by different drilling combinations to improve the drilling speed.